Is My Vintage, Made-in-Japan (MIJ) Guitar a Real Ibanez?

In many cases, these Japanese Fenders and Gibsons are of higher build quality, finish and tone than the US made versions. The Japanese models usually had a long tenon like the LP’s, and are not weight relieved, the US Standard version did not have a long tenon and is weight relieved. These are rare, and the ObG Reissue solid flametops are even rarer. There were also a number of limited run series made for large Japanese guitar shops, such as Yamano, these can be spotted by the lack of a pickguard hole as they were ordered with the pickguards off, and are sometimes, but not always, solid flame tops, and one very limited run features solid Flametops, and a one piece back. Most of the ObG flametops are laminate, but there are some solid flametop guitars, these are extremely rare. There are some LPQ solid quilted models but again very rare.

Guitar Player Magazine Backissues

Fernandes Burny Here’s a quick way to tell if you have a Matsumoku factory guitar whether branded or not. That’s a dead giveaway that you’ve got one of “Uncle Matt’s” guitars. As I said above, Fujigen and the other manufacturers produced guitars with no logos at all for sale around the world. That in itself shouldn’t cause much confusion, because we know from Hoshino that “if it doesn’t say Ibanez” it’s not an Ibanez.

However, Fujigen Gakki, the manufacturer of Ibanez-branded guitars would provide stock, no-name images to Hoshino and other distributors for use in their catalogs. Fujigen only had to take one picture of a guitar instead of one with each different brand on it.

Hey Zach, I have owned this Ibanez “lawsuit” guitar for over 25 years and I’d like to know a little more about it. The serial number on the neck plate is KXX and as far as I know, it is all original except for the missing pickup cover.

Is anyone able to date my Epiphone Sheraton? The serial number is and it’s located on a stick-on strip on the back of the headstock. The front of the headstock has “Epiphone by Gibson” at the top and the Epiphone logo at the bottom. Dont know a lot about these numbers so take that with a pinch of salt, you could try posting your question here: Anyone else want to chip in?

Hi, I have such an Epiphone, serial number begining with 88 and I cannot find when it was made either! I would guess the guitar is either a copy or eipiphone had samples made by prospective suppliers in the late eighties. Due to the 88 at the front I think it might be an early sample from the company whom started manufacture in the 90’s for Epiphone. There is one extra digit to many to show it as being in the Gibson series.

Gibson Brands Forums: Epiphone Electrics – Gibson Brands Forums

The ES was introduced in Gibson hired Ted McCarty in , who became President in He led an expansion of the guitar line with new guitars such as the “Les Paul” guitar introduced in and designed by Les Paul , a popular musician in the s and also a pioneer in music technology. Later, a shorter neck was added. Similar in size to the hollow-body Thinlines, the ES family had a solid center, giving the string tone a longer sustain. In the s, Gibson also produced the Tune-o-matic bridge system and its version of the humbucking pickup, the PAF “Patent Applied For” , first released in and still sought after for its sound.

Hi, It would be much easier if you posted the serial number then I/we could look at it and provide info for you; however, here are some general guidelines.

Olympic Special electric solidbody Introduction: Epiphone was a family business established in as “the House of Stathopoulo” by Anastasios Stathopoulo, a greek violin maker. In they incorporated and at this time made mostly high quality and fancy banjos. In the name was changed to “Epiphone” after Epi Stathopoulo, president of the company and one of the founder’s sons. In the ‘s, the company changed its emphasis to guitars. Epiphone was the only banjo company to successfully switch to guitar production.

The Rockabilly Guitar Page Newsletter

Plush Gig Bag Case Silkscreen: The Les Paul Deluxe has the 2 mini humbuckers which are sounding just awesome. Furthermore it has an all mahogany body pancake and Mahogany neck. Chrome hardware,rosewood fretboard-cherry finish,an awesome vintage LP Gibson. Condition is good,all works and has all original electronics-frets etc.

Free casino slot Code Bonus Casino Belge En Ligne games app Grand casino slots Hotel rooms near crown casino melbourne Soaring eagle casino location Blackjack knives simba Code Bonus Casino Belge En Ligne Time roulette yugioh Casino aachen cash game Free games download Code Bonus Casino Belge En Ligne high roller casino Flash roulette fla Emerald casino vanderbijlpark careers Vegas slots .

All numbers were impressed into the wood and a six digit number assigned, though no particular order was given and some instruments had a letter prefix. The orange labels inside hollow bodied instruments was discontinued in and were replaced by white and orange rectangle labels on the acoustics, and small black, purple and white rectangle labels were placed on electric models.

A few bolt on neck instruments had a date ink stamped on the heel area. In , Gibson first introduced the serialization method that is in practice today. This updated system utilizes an impressed eight digit numbering scheme that covers both serializing and dating functions. The pattern is as follows: The numbers show Kalamazoo production, show Nashville production.

The Kalamazoo numbers were discontinued in Bozeman instruments began using designations and, in , Nashville instruments began using designations.

List of Gibson players

Compare this body shape, particularly the bevelling around the horns, with a later Gibson Ripper – these later Rippers have a far more sculptured look about them, although this is not always easy to see in photographs. A total of Rippers were shipped in , with the vast majority in Natural finish as seen here, although many very early ones had a tobacco or cherry sunburst finish. See the Ripper shipping stats for further details.

This is a really punchy bass; lots of Gibson low end, but with so much more higher frequencies than Gibson’s older basses. The Ripper body changed from this wider slab bodied bass, to a more sculptured version – see a Ripper with the newer body styling.

GIBSON SERIALIZATION. Identifying Gibson instruments by serial number is tricky at best and downright impossible in some cases. The best methods of identifying them is by using a combination of the serial number, the factory order.

If you’re not familiar with my site, it’s simple, and you’ll love it or hate it: It’s not a fancy site but it remains unchanged since ’98 so I figure, “if it ain’t broke – don’t fix it. Just click on any underlined text and it should open a picture; if you move your cursor over the pic and there’s a magnifying glass displayed instead of your cursor, click the pic and it will expand it to larger size.

These guitars already have a great vintage vibe with an authentic looking two-tone sunburst gloss finish, parchment parts, and tinted neck, so the vintage logo is icing on the cake. Other features include C-shaped maple neck with maple fingerboard and modern 9. Like the early vintage models this guitar also has stacked knobs with a volume and tone on each pot.

Epiphone Serials….

Go to menu top I never heard anything better than a Fender if we’re talking about the big manufacturers. Later on, in the Guitar section, I’ll also talk about Standel and EchoSonic , but they’re produced in such small numbers that it’s fair to say they’ll only have historic interest to the most of us So As long as you get a tube Fender you’ll probably be on the right track, because they all sound pretty good.

It doesn’t have to be vintage at all, but they do look pretty cool. Actually I started out playing a vintage Vox AC 30 and it wasn’t bad at all.

Hey Zach, I have owned this Ibanez “lawsuit” guitar for over 25 years and I’d like to know a little more about it. The serial number on the neck plate is KXX and as far as I know, it is all original except for the missing pickup cover.

Best Jump on these while they are still here and available!! The values have drifted a little measure about. In fact, I have sold over a dozen or so of these over the past year and these examples are by far the cleanest I have seen in a long time!! Gauranteed to work upon arrival! Please mail with any questions. So this It is the reason it was prematurely retired years ago. Notice that this pickup bottom plate has the regular mounting holes , as well as the diagonal corner holes as used on early 50’s les pauls.

Roland G-303 Guitar Synthesizer Controller

From ‘ ’69 hollow body guitars had the serial number on a label inside the guitar, prefexed by the letter “A” plus four digits for the first four years 57 to Beginning in the number was pressed into the back of the headstock. Between and the Epiphone was manufactured in Japan and the serial numbers became unreliable for dating purposes.

By Vince Gordon. I’m often asked rockabilly guitar questions, so I have created this page that should answer most FAQ.. What I express here is my personal opinion. There are – like with most things – different ways of achieving the same goals.

The ES was introduced in Gibson hired Ted McCarty in , who became President in He led an expansion of the guitar line with new guitars such as the “Les Paul” guitar introduced in and designed by Les Paul , a popular musician in the s and also a pioneer in music technology. Later, a shorter neck was added. Similar in size to the hollow-body Thinlines, the ES family had a solid center, giving the string tone a longer sustain.

In the s, Gibson also produced the Tune-o-matic bridge system and its version of the humbucking pickup, the PAF “Patent Applied For” , first released in and still sought after for its sound. These “modernistic” guitars did not sell initially. It was only in the late s and early 70s when the two guitars were reintroduced to the market that they sold well.

Gibson Serial Numbers

The Custom is the guitar he is generally associated with. Gibson has also produced two Billie Joe Armstrong Signature Les Paul Junior models one double cutaway, and one single cutaway as well as a very limited run of signature acoustic guitars. Since his death, Gibson has discontinued all Chet Atkins models and Gretsch has resumed the manufacturing and distribution of the Chet Atkins line.

Beck’s fascination with the guitar sprang as much from his interest in Les Paul , the man, as from his love of the guitar itself. Beck told an interviewer: The guitar was given to him in by Peter Green.

By Vince Gordon. I’m often asked rockabilly guitar questions, so I have created this page that should answer most FAQ.. What I express here is my personal opinion. There are – like with most things – different ways of achieving the same goals.

If you’re not familiar with my site, it’s simple, and you’ll love it or hate it: It’s not a fancy site but it remains unchanged since ’98 and I firmly believe, “if it ain’t broke – don’t fix it. Just click on any underlined text and it should open a picture; if you move your cursor over the pic and there’s a magnifying glass displayed instead of your cursor, click the pic and it will expand it to larger size. Sennheiser e Silver Instrument Mic. The design and specs allow for simply draping over the top and resting on grill cloth if you prefer to not use a mic stand.

Also works well with drums. Features include rugged metal body, advanced shock-mount design, super-cardioid pick-up pattern, and hum compensating coil. Includes mic clip and case. Quality Pedaltrain board with a durable padded gig bag made of cordura nylon, with adjustable shoulder strap and gusseted exterior storage pocket for cables, straps, etc. The pedalboard is on an inclined plane and includes brackets for mounting your favorite power supply underneath the frame.

Gibson Serial Numbers – 1977 to Present


Hi! Do you need to find a partner for sex? Nothing is more simple! Click here, free registration!